Etepic

#‎include‬ <20150405_buzdemo.h>
‪#‎define‬ LED_ONF PIN_B0
#define LED_FAN PIN_B1
#define LED_KOMP PIN_B2
#define LED_1DEG PIN_B7
#define LED_2DEG PIN_B6
#define LED_4DEG PIN_B5
#define LED_6DEG PIN_B4
#define LED_8DEG PIN_B3
#define SW_KAPI PIN_A3
#define SW_GUC PIN_A4
#define ACIK 0
#define KAPALI 1
#define FAN_CALIS output_low(LED_FAN)
#define FAN_DUR output_high(LED_FAN)
#define KOMP_CALIS output_low(LED_KOMP)
#define KOMP_DUR output_high(LED_KOMP)
unsigned int set_val,cur_val,tick,guc;
‪#‎INT_RTCC‬
void RTCC_isr(void) {
set_val=(255-read_adc())/30;
output_high(LED_1DEG);output_high(LED_2DEG);output_high(LED_4DEG);output_high(LED_6DEG);output_high(LED_8DEG);output_high(LED_ONF); 
if(guc==0) return;
output_low(LED_ONF);
if(cur_val<=1){ output_low(LED_1DEG);}
else if(cur_val<=2){ output_low(LED_2DEG);} 
else if(cur_val<=4){ output_low(LED_4DEG);} 
else if(cur_val<=6){ output_low(LED_6DEG);} 
else if(cur_val<=8){ output_low(LED_8DEG);}

}
void main() {
setup_adc_ports(sAN0);
setup_adc(ADC_CLOCK_INTERNAL);
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_256|RTCC_8_bit); //262 ms overflow
output_b(0xFF);
set_adc_channel(0);
enable_interrupts(INT_RTCC);
enable_interrupts(GLOBAL);
set_val=(255-read_adc())/32;
cur_val=0;
tick=0;
guc=0;
while(TRUE){
start: 
if(input(SW_GUC)==0){ while(input(SW_GUC)==0) delay_ms(300); if(guc==0) guc=1; else guc=0; }
if(guc==0) {
goto start;
}
delay_ms(1000);
tick++;
if(input(SW_KAPI)==KAPALI){
if(tick>=2){
tick=0;
if(cur_val==set_val){
FAN_DUR; KOMP_DUR;
}
else if(cur_val<set_val){
cur_val++;
FAN_DUR; KOMP_DUR;
}
else{
cur_val--;
FAN_CALIS; KOMP_CALIS;
}
}
}
else{
if(tick>=2){
tick=0;
FAN_DUR; KOMP_DUR;
if(cur_val<8){
cur_val++;
}
} 
}
}
}